How best to configure the /etc/netsvc.conf file, making it easier to troubleshoot when resolving DNS issues: This file should resolve locally and through DNS. The line would read:
hosts=local,bindYou then would need to make sure that all the local adapter IP addresses are entered in /etc/hosts. After that is complete, for every adapter on the system you would apply:
# hostThis will ensure a host command generates the same ouput (the hostname) with and without /etc/netsvc.conf. That way, you'll know you can continue to do certain things while troubleshooting a DNS problem.
No more ordering CDROMs or DVDs and waiting days. Download the .iso image over the web and install from there. Use the virtual DVD drive on your VIOS 2.1 and install directly into the LPAR or read the contents into your NIM Server.
Mount the .ISO image:
- On AIX 6.1 or AIX 7, use the loopmount command: http://publib.boulder.ibm.com/infocenter/aix/v6r1/index.jsp?topic=/com.ibm.aix.cmds/doc/aixcmds3/loopmount.htm
- On AIX 5.3, use the mklv-dd-mount trick: https://www.ibm.com/developerworks/wikis/display/WikiPtype/AIXV53MntISO
You have to prove you are entitled via: Customer number, Machine serial numbers or SWMA. The Entitled Software Support Download User Guide can be downloaded here: ftp://public.dhe.ibm.com/systems/support/planning/essreg/I1128814.pdf. Then you can download the AIX media, Expansion Packs, Linux Toolbox and more.
Start at: www.ibm.com/eserver/ess.
The command svmon -G can be used to determine the actual memory consumption of a server. To determine if the memory is over-committed, you need to divide the memory-virtual value by the memory-size value, e.g.:
# svmon -G
size inuse free pin virtual
memory 5079040 5076409 2631 706856 2983249
pg space 7864320 12885
work pers clnt other
pin 540803 0 2758 163295
in use 2983249 0 2093160
PageSize PoolSize inuse pgsp pin virtual
s 4 KB - 4918761 12885 621096 2825601
m 64 KB - 9853 0 5360 9853
In this example, the memory-virtual value is 2983249, and the memory-size value is 5079040. Note that the actual memory-inuse (5076409) is nearly the same as the memory-size (5079040) value. This is simply AIX caching as much as possible in its memory. Hence, the memory-free value is typically very low, 2631 in the example above. As such, determining the memory size based on the memory-free value does not provide a good interpretation of the actual memory consumption, as memory typically includes a lot of cached data.
Now, to determine the actual memory consumption, divide memory-virtual by memory-size:
Thus, the actual memory consumption is 58% of the memory. The size of the memory is 5079040 blocks of 4 KB = 19840 MB. The free memory is thus: (100% - 58%) * 19840 MB = 8332 MB.# bc scale=2 2983249/5079040 .58
Try to keep the value of memory consumption less than 90%. Above that, you will generally start seeing paging activity using the vmstat command. By that time, it is a good idea to lower the load on the system or to get more memory in your system.
You can grow your ext3 filesystems while online: The functionality has been included in resize2fs so to resize a logical volume, start by extending the volume:
# lvextend -L +2G /dev/systemvg/homelvAnd the resize the filesystem:
# resize2fs /dev/systemvg/homelvBy omitting the size argument, resize2fs defaults to using the available space in the partition/lv.
Memory utilization on AIX systems typically runs around 100%. This is often a source of concern. However, high memory utilization in AIX does not imply the system is out of memory. By design, AIX leaves files it has accessed in memory. This significantly improves performance when AIX reaccesses these files because they can be reread directly from memory, not disk. When AIX needs memory, it discards files using a "least used" algorithm. This generates no I/O and has almost no performance impact under normal circumstances.
Sustained paging activity is the best indication of low memory. Paging activity can be monitored using the "vmstat" command. If the "page-in" (PI) and "page-out" (PO) columns show non-zero values over "long" periods of time, then the system is short on memory. (All systems will show occasional paging, which is not a concern.)
Memory requirements for applications can be empirically determined using the AIX "rmss"command. The "rmss" command is a test tool that dynamically reduces usable memory. The onset of paging indicates an application's minimum memory requirement.
Finally, the "svmon" command can be used to list how much memory is used each process. The interpretation of the svmon output requires some expertise. See the AIX documentation for details.
To test the performance gain of leaving a file in memory, a 40MB file was read twice. The first read was from disk, the second was from memory. The first read took 10.0 seconds. The second read took 1.3 second: a 7.4x improvement.
Topics: AIX, Storage, System Admin↑
Using NFS
The Networked File System (NFS) is one of a category of filesystems known as distributed filesystems. It allows users to access files resident on remote systems without even knowing that a network is involved and thus allows filesystems to be shared among computers. These remote systems could be located in the same room or could be miles away.
In order to access such files, two things must happen. First, the remote system must make the files available to other systems on the network. Second, these files must be mounted on the local system to be able to access them. The mounting process makes the remote files appear as if they are resident on the local system. The system that makes its files available to others on the network is called a server, and the system that uses a remote file is called a client.
NFS Server
NFS consists of a number of components including a mounting protocol, a file locking protocol, an export file and daemons (mountd, nfsd, biod, rpc.lockd, rpc.stad) that coordinate basic file services.
Systems using NFS make the files available to other systems on the network by "exporting" their directories to the network. An NFS server exports its directories by putting the names of these directories in the /etc/exports file and executing the exportfs command. In its simplest form, /etc/exports consists of lines of the form:
pathname -option, option ...Where pathname is the name of the file or directory to which network access is to be allowed; if pathname is a directory, then all of the files and directories below it within the same filesystem are also exported, but not any filesystems mounted within it. The next fields in the entry consist of various options that specify the type of access to be given and to whom. For example, a typical /etc/exports file may look like this:
This export file permits the filesystem /cyclops/users to be mounted by homer and bart, and allows root access to it from homer. In addition, it lets /usr/share/man to be mounted by marge, maggie and lisa. The filesystem /usr/mail can be mounted by any system on the network. Filesystems listed in the export file without a specific set of hosts are mountable by all machines. This can be a sizable security hole./cyclop/users -access=homer:bart, root=homer /usr/share/man -access=marge:maggie:lisa /usr/mail
When used with the -a option, the exportfs command reads the /etc/exports file and exports all the directories listed to the network. This is usually done at system startup time.
# exportfs -vaIf the contents of /etc/exports change, you must tell mountd to reread it. This can be done by re-executing the exportfs command after the export file is changed.
The exact attributes that can be specified in the /etc/exports file vary from system to system. The most common attributes are:
- -access=list : Colon-separated list of hostnames and netgroups that can mount the filesystem.
- -ro : Export read-only; no clients may write on the filesystem.
- -rw=list : List enumerates the hosts allowed to mount for writing; all others must mount read-only.
- -root=list : Lists hosts permitted to access the filesystem as root. Without this option, root access from a client is equivalent to access by the user nobody (usually UID -1).
- -anon : Specifies UID that should be used for requests coming from an unknown user. Defaults to nobody.
- -hostname : Allow hostname to mount the filesystem.
/cyclop/users -rw=moe,anon=-1 /usr/inorganic -roThis allows moe to mount /cyclop/users for reading and writing, and maps anonymous users (users from other hosts that do not exist on the local system and the root user from any remote system) to the UID -1. This corresponds to the nobody account, and it tells NFS not to allow such users access to anything.
NFS Clients
After the files, directories and/or filesystems have been exported, an NFS client must explicitly mount them before it can use them. It is handled by the mountd daemon (sometimes called rpc.mountd). The server examines the mount request to be sure the client has proper authorization.
The following syntax is used for the mount command. Note that the name of the server is followed by a colon and the directory to be mounted:
# mount server1:/usr/src /srcHere, the directory structure /usr/src resident on the remote system server1 is mounted on the /src directory on the local system.
When the remote filesystem is no longer needed, it is unmounted with the umount:
# umount server1:/usr/srcThe mount command can be used to establish temporary network mounts, but mounts that are part of a system's permanent configuration should be either listed in /etc/filesystems (for AIX) or handled by an automatic mounting service such as automount or amd.
NFS Commands
- lsnfsexp : Displays the characteristics of directories that are exported with the NFS.
# lsnfsexp software -ro
- mknfsexp -d path -t ro : Exports a read-only directory to NFS clients and add it to /etc/exports.
# mknfsexp -d /software -t ro /software ro Exported /software # lsnfsexp /software -ro
- rmnfsexp -d path : Unexports a directory from NFS clients and remove it from /etc/exports.
# rmnfsexp -d /software
- lsnfsmnt : Displays the characteristics of NFS mountable file systems.
- showmount -e : List exported filesystems.
# showmount -e export list for server: /software (everyone)
- showmount -a : List hosts that have remotely mounted local systems.
# showmount -a server2:/sourcefiles server3:/datafiles
In the following discussion, reference to daemon implies any one of the SRC-controlled daemons (such as nfsd or biod).
The NFS daemons can be automatically started at system (re)start by including the /etc/rc.nfs script in the /etc/inittab file.
They can also be started manually by executing the following command:
# startsrc -s Daemon or startsrc -g nfsWhere the -s option will start the individual daemons and -g will start all of them.
These daemons can be stopped one at a time or all at once by executing the following command:
# stopsrc -s Daemon or stopsrc -g nfsYou can get the current status of these daemons by executing the following commands:
If the /etc/exports file does not exist, the nfsd and the rpc.mountd daemons will not start. You can get around this by creating an empty /etc/exports file. This will allow the nfsd and the rpc.mountd daemons to start, although no filesystems will be exported.# lssrc -s [Daemon] # lssrc -a
Topics: Installation, Red Hat / Linux↑
Linux Kickstart using a configuration file on a USB thumbdrive
In case you're wondering "How do I load a kickstart configuration file on my USB thumbdrive, while installing Linux?", we can tell you, it is really simple. You only have to know the syntax to do this.
First, make sure that both the Linux DVD and the USB thumdrive are connected to the system, either directly, or through virtual media. Then, to install linux, type:
# linux ks=hd:sdc:/ks.cfg(Replace "ks.cfg" with the actual Kickstart configuration file name)
More information can be found here:
- https://www.redhat.com/docs/manuals/enterprise/RHEL-4-Manual/sysadmin-guide/s1-kickstart2-startinginstall.html
- http://www.redhat.com/docs/manuals/enterprise/RHEL-5-manual/Installation_Guide-en-US/s1-kickstart2-startinginstall.html
- http://www.redhat.com/docs/manuals/enterprise/RHEL-5-manual/Installation_Guide-en-US/ch-kickstart2.html
Topics: AIX, Storage, System Admin↑
Working with disks
With the passing time, some devices are added, and some are removed from a system. AIX learns about hardware changes when the root user executes the cfgmgr command. Without any attributes, it scans all buses for any attached devices. Information acquired by cfgmgr is stored in the ODM (Object Database Manager). Cfgmgr only discovers new devices. Removing devices is achieved with rmdev or odmdelete. Cfgmgr can be executed in the quiet (cfgmgr) or verbose (cfgmgr -v) mode. It can be directed to scan all or selected buses.
The basic command to learn about disks is lspv. Executed without any parameters, it will generate a listing of all disks recorded in the ODM, for example:
Each row describes one disk. The first column shows its name followed by the PVID and the volume group it belongs to. "None" in the last column indicates that the disk does not belong to any volume group. "Active" in the last column indicates, that the volume group is varied on. Existence of a PVID indicates possibility of presence of data on the disk. It is possible that such disk belongs to a volume group which is varied off.# lspv hdisk0 00c609e0a5ec1460 rootvg active hdisk1 00c609e037478aad rootvg active hdisk4 00c03c8a14fa936b abc_vg active hdisk2 00c03b1a32e50767 None hdisk3 00c03b1a32ee4222 None hdisk5 00c03b1a35cdcdf0 None
Executing lspv with a disk name generates information only about this device:
In the case of hdisks, we are able to determine its size, the number of logical volumes (two), the number of physical partitions in need of synchronization (Stale Partitions) and the number of VGDA's. Executing lspv against a disk without a volume group membership does nothing useful:# lspv hdisk4 PHYSICAL VOLUME: hdisk4 VOLUME GROUP: abc_vg PV IDENTIFIER: 00c03c8a14fa936b VG IDENTIFIER: 00c03b1a000 PV STATE: active STALE PARTITIONS: 0 ALLOCATABLE: yes PP SZE: 16 megabyte(s) LOGICAL VOLUMES: 2 TOTAL PPs: 639 (10224 megabytes) VG DESCRIPTORS: 2 FREE PPs: 599 (9584 megabytes) HOT SPARE: no USED PPs: 40 (640 megabytes) MAX REQUEST: 256 kb FREE DISTRIBUTION: 128..88..127..128..128 USED DISTRIBUTION: 00..40..00..00..00
How do you establish the capacity of a disk that does not belong to a volume group? The next command provides this in megabytes:# lspv hdisk2 0516-304: Unable to find device id hdisk2 in the Device configuration database
The same (and much more) information can be retrieved by executing lsattr -El hdisk#:# bootinfo -s hdisk2 10240
The last command can be limited to show only the size if executed as shown:# lsattr -El hdisk0 PCM PCM/scsiscsd Path Control Module False algorithm fail_over Algorithm True dist_err_pcnt 0 Distributed Error % True dist_tw_width 50 Sample Time True hcheck_interval 0 Health Check Interval True hcheck_mode nonactive Health Check Mode True max_transfer 0x40000 Maximum TRANSFER Size True pvid 00c609e0a5ec1460 Volume identifier False queue_depth 3 Queue DEPTH False reserve_policy single_path Reserve Policy True size_in_mb 73400 Size in Megabytes False unique_id 26080084C1AF0FHU Unique identifier False
A disk can get a PVID in one of two ways: by the virtue of membership in a volume group (when running extendvg or mkvg commands) or as the result of execution of the chdev command. Command lqueryvg helps to establish if there is data on the disk or not.# lsattr -El hdisk0 -a size_in_mb size_in_mb 73400 Size in Megabytes False
# lqueryvg -Atp hdisk2
0516-320 lqueryvg: hdisk2 is not assigned to a volume group.
Max LVs: 256
PP Size: 26
Free PPs: 1117
LV count: 0
PV count: 3
Total VGDAs: 3
Conc Allowed: 0
MAX PPs per PV 1016
MAX PVs: 32
Quorum (disk): 1
Quorum (dd): 1
Auto Varyon ?: 1
Conc Autovaryo 0
Varied on Conc 0
Physical: 00c03b1a32e50767 1 0
00c03b1a32ee4222 1 0
00c03b1a9db2f183 1 0
Total PPs: 1117
LTG size: 128
HOT SPARE: 0
AUTO SYNC: 0
VG PERMISSION: 0
SNAPSHOT VG: 0
IS_PRIMARY VG: 0
PSNFSTPP: 4352
VARYON MODE: ???????
VG Type: 0
Max PPs: 32512
This disk belongs to a volume group that had three disks:
PV count: 3Their PVIDs are:
Physical: 00c03b1a32e50767 1 0
00c03b1a32ee4222 1 0
00c03b1a9db2f183 1 0
At this time, it does not have any logical volumes:
LV count: 0It is easy to notice that a disk belongs to a volume group. Logical volume names are the best proof of this. To display data stored on a disk you can use the command lquerypv.
A PVID can be assigned to or removed from a disk if it does not belong to a volume group, by executing the command chdev.
Now, let's give the disk a new PVID:# chdev -l hdisk2 -a pv=clear hdisk2 changed lspv | grep hdisk2 hdisk2 none None
At times, it is required to restrict access to a disk or to its capacity. You can use command chpv for this purpose. To prevent I/O to access to a disk:# chdev -l hdisk2 -a pv=yes hdisk2 changed # lspv | grep hdisk2 hdisk2 00c03b1af578bfea None
# chpv -v r hdisk2To allow I/O:
# chpv -v a hdisk2I/O on free PPs is not allowed:
# chpv -a n hdisk2I/O on free PPs is allowed:
# chpv -a y hdisk2AIX was created years ago, when disks were very expensive. I/O optimization, the decision what part of data will be read/written faster than other data, was determined by its position on the disk. Between I/O, disk heads are parked in the middle. Accordingly, the fastest I/O takes place in the middle. With this in mind, a disk is divided into five bands called: outer, outer-middle, center, inner and inner-edge. This method of assigning physical partitions (logical volumes) as the function of a band on a disk, is called the intra-physical policy. This policy and the policy defining the spread of logical volume on disks (inter-physical allocation policy) gains importance while creating logical volumes.
Disk topology, the range of physical partitions on each band is visualized with command lsvg -p vg_name and lspv hdisk#. Note the last two lines of the lspv:
The row labeled FREE DISTRIBUTION shows the number of free PPs in each band. The row labeled USED DISTRIBUTION shows the number of used PPs in each band. As you can see, some bands of this disk have no data. Presently, this policy lost its meaning as even the slowest disks are much faster then their predecesors. In the case of RAID or SAN disks, this policy has no meaning at all. For those who still use individual SCSI or SSA disks, it is good to remember that the data closer to the outer edge is read/written the slowest.FREE DISTRIBUTION: 128..88..127..128..128 USED DISTRIBUTION: 00..40..00..00..00
To learn what logical volumes are located on a given disk, you can execute command lspv -l hdisk#. The reversed relation is established executing lslv -M lv_name.
It is always a good idea to know what adapter and what bus any disk is attached to. Otherwise, if one of the disks breaks, how will you know which disk needs to be removed and replaced? AIX has many commands that can help you. It is customary to start from the adapter, to identify all adapters known to the kernel:
The last command produced information about SCSI adapters present during the last execution of the cfgmgr command. This output allows you to establish in what drawer the adapter is located as well. The listing, tells us that there are three SCSI adapters. The second colums shows the device state (Available: ready to be used; Defined: device needs further configuration). The next column shows its location (drawer/bus). The last column contains a short description. Executing the last command against a disk from rootvg produces:# lsdev -Cc adapter | grep -i scsi scsi0 Available 1S-08 Wide/Ultra-3 SCSI I/O Controller scsi1 Available 1S-09 Wide/Ultra-3 SCSI I/O Controller scsi2 Available 1c-08 Wide/Fast-20 SCSI I/O Controller
From both outputs we can determine what SCSI adapter controls this disk - scsi0. Also, we see that disk has SCSI ID 8,0. How to determine the type/model/capacity/part number, etc?# lsdev -Cc disk -l hdisk0 hdisk0 Available 1S-08-00-8,0 16 Bit LVD SCSI Disk Drive
# lscfg -vl hdisk0
hdisk0 U0.1-P2/Z1-A8 16 Bit LVD SCSI Disk Drive (36400 MB)
Manufacturer................IBM
Machine Type and Model......IC35L036UCDY10-0
FRU Number..................00P3831
ROS Level and ID............53323847
Serial Number...............E3WP58EC
EC Level....................H32224
Part Number.................08K0293
Device Specific.(Z0)........000003029F00013A
Device Specific.(Z1)........07N4972
Device Specific.(Z2)........0068
Device Specific.(Z3)........04050
Device Specific.(Z4)........0001
Device Specific.(Z5)........22
Device Specific.(Z6)........
You can get more details by executing command: lsattr -El hdisk0.The environment variable EXTENDED_HISTORY in AIX will timestamp your shell history. In ksh, you set it as follows:
# export EXTENDED_HISTORY=ONA good practice is to set this variable in /etc/environment.
To view your history:
NOTE: before setting this environment variable, the previous commands in your history will have a question mark in the timestamp field.# history 888 ? :: cd aix_auth/ 889 ? :: vi server 890 ? :: ldapsearch 891 ? :: fc -lt 892 ? :: fc -l
If you use the fc command, you will have to use the "-t" option to see the timestamp:
# fc -t
Red hat Linux provides following tools to make changes to Network configuration such as add new card, assign IP address, change DNS server, etcetera:
- GUI tool (X windows required) - system-config-network
- Command line text based GUI tool (No X windows required) - system-config-network-tui
- Edit configuration files directly, stored in /etc/sysconfig/network-scripts directory
Editing the configuration files stored in /etc/sysconfig/network-scripts:
First change directory to /etc/sysconfig/network-scripts/:
# cd /etc/sysconfig/network-scripts/You need to edit / create files as follows:
- /etc/sysconfig/network-scripts/ifcfg-eth0 : First Ethernet card configuration file
- /etc/sysconfig/network-scripts/ifcfg-eth1 : Second Ethernet card configuration file
# vi ifcfg-eth0Append/modify as follows:
Save and close the file. Define the default gateway (router IP) and hostname in /etc/sysconfig/network file:# Intel Corporation 82573E Gigabit Ethernet Controller (Copper) DEVICE=eth0 BOOTPROTO=static DHCPCLASS= HWADDR=00:30:48:56:A6:2E IPADDR=10.251.17.204 NETMASK=255.255.255.0 ONBOOT=yes
Save and close the file. Restart networking:# vi /etc/sysconfig/network NETWORKING=yes HOSTNAME=host.domain.com GATEWAY=10.251.17.1
# /etc/init.d/network restartMake sure you have correct DNS server defined in /etc/resolv.conf file. Try to ping the gateway, and other hosts on your network. Also check if you can resolv host names:
# nslookup host.domain.comAnd verify if the NTP servers are correct in /etc/ntp.conf, and if you can connect to the time server, by running the ntpdate command against one of the NTP servers:
# ntpdate 10.20.30.40This should synchronize system time with time server 10.20.30.40.
Displaying results: 221 - 230.
